Max Working Pressure - 150psi

Accessory change using on-board Allen Key

Whether you're working on small crafts or larger projects

uncut edges

the jaws are flush with the bench top

Dymaxion Adaptor Extension, 1/2" BSP to 1/2" BSP Thread Taper Gauge Max Working Pressure - 150psiFeatures If you want to drill deeper than the specified depth of your core bit ensure mandrel or adaptor rod does not exceed the diameter of the core bit. Larger and heaver core bits (over 80mm) are recommended to use Hex or SDS Max shanks to avoid SDS Plus chuck damage. Centre pilot drills are required to control starting the cut. Options ABB200 ABB350 Options ABB200 ABB350